Table of Contents
Advertisement
Product Information MAGIC.SENS -- Product range
11.1. Notes for the service: display of the operating data
With the exception of the special KKW detector types, for all
configured detectors you can use the WinPara programming
software (V 4.53 or higher) to display the serial number, degree of
contamination, operating hours, and current analog values.
Display of the operating data
BG- - Adr.:
module (NVU/LVM) on which the detector or detector line is installed.
Address:
Installation address of the detector
e.g. 10--03: The detector is in the detector group 10 and has the detector number 3.
Brief info:
additional information entered during programming, e.g. "O400 to MSS400" means
that the O 400 E LSN is installed together with a detector base siren MSS 400. Here
you can also enter the position of the detector.
Type:
display of the set detector type.
Serial number:
the first number of the 8--digit serial number specifies the year of manufacture,
that is, the detector with the serial number 3931859 was manufactured in 2003.
Page 34 of 42
PI -- 34.65d
BDL- -4998121218
A23.en /09.02.2007
ST- -FIR/ PRM1 / deh
Hide quick links:
Advertisement
Table of Contents
