Table of Contents
Advertisement
Product Information MAGIC.SENS -- Product range
PI -- 34.65d
1. Foreword
The MAGIC .SENS fire detector series combines standard detection procedures such
as scattered light measurement and temperature measurement in their highest stage
of expansion with gas measurement technology.
Here, the signals of scattered light sensors, temperature sensors, and gas sensors are
processed with the help of modern signal--processing procedures.
Thus security against deceptive alarms is increased significantly and detection time
is reduced in comparison to the fire detectors available on the market today.
Thanks to the higher information content of the multisensor detectors, the use of
detectors is also possible in environments where pure smoke detectors cannot be
used.
The detectors are available in thefollowing stages of expansion:
D Combined optical, thermal, gas--sensitive smoke detectors
D Combined optical, thermal smoke detectors
D Optical smoke detectors
D Thermal detectors
D Combined optical, gas--sensitive detectors
The line technology variants are:
D LSN (Local SecurityNetwork)
D GLT (Gleichstrom (conventional line)technology)
The cooperation of engineers and designers created the timeless, innovative design
of this detector, which integrates pleasantly into the ceiling.
With this design it is possible to reconcile the contradictory goals of a generous
installation space and a small detector.
The placement of the individual display on the detector tip is the first externally--visible
characteristic of the installation--friendly development concept.
The form--stable and robust detector base must no longer be aligned using the
position--independent position of the individual display.
It is suitable for surface and concealed mounting and provides separate mounting
points for dropped ceiling / recessed sockets.
In addition, it fits all common bore patterns.
For surface mounting, the cable may be fed through on the side.
The integrated strain relief for false floor cables prevents cables from being pulled out
of the terminal after installation.
The terminals are easily accessible, a retainer for the end resistance is integrated.
2
Cables up to 2.5 mm in diameter
can be used.
It can be expanded with a damp room seal so that with one base, all installation
requirements can be met.
BDL- -4998121218
A23.en /09.02.2007
ST- -FIR/ PRM1 / deh
Page 4 of 42
Hide quick links:
Advertisement
Table of Contents
