Table of Contents
Advertisement
Operation
OSD menu functions
The OSD menu for analog monitor operation is described below. During
digital operation some functions are not available, as they are not required
due to the digital transmission technology used.
Adjusting the brightness and contrast
Brightness
Contrast
Black level
Auto brightness
Auto level
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
Adjusting the picture size and position
H-position
V-position
Clock
Phase
24
Call up the Brightness/Contrast setting window
Set the brightness of the display
With this function you change the brightness of the background lighting.
Set the contrast of the display
With this function you modify the contrast of bright colour tones.
Set the brightness of the display
With this function you modify the contrast of dark colour tones.
Automatic brightness control
This function is used to automatically control the brightness of the
background lighting using the light sensor.
On = The brightness is adjusted according to the ambient brightness
Off = The brightness is adjusted manually by the user.
Adjust the signal level
With this function you can automatically set the contrast.
The function is executed with the
Open the Image adjust window
Adjusting the horizontal position
With this function you can move the picture to the left or to the right.
Adjusting the vertical position
With this function you can move the picture up or down.
Adjusting the synchronisation
With this function you can adjust the picture width in order to eliminate
vertical picture faults.
Eliminating picture faults
With this function you fine-tune your monitor to eliminate picture faults.
SELECT / MENU
button.
A26361-K1240-Z120-7619, edition 1
- Quick Links:
- Table of Contents
- Your Lcd Screen
- Technical Data
Hide quick links:
Advertisement
Table of Contents
