Table of Contents
Advertisement
8. Remove the two mounting screws securing the drive bay to the front of the
chassis. See Figure 4-24, C, and D.
9. Remove the mounting screw securing the drive bay to the left side of the
chassis. See Figure 4-24, E.
10. Lift the drive bay upward and remove the drive bay out of the left side of the
chassis. See Figure 4-25. Position the drive bay on a padded surface.
Figure 4-25. Removing the Drive Bay out of the Chassis
11. Remove the three screws and seven pop-rivets securing the SCSI backplane
to the drive bay. See Figure 4-26. Remove the SCSI backplane.
Figure 4-26. Removing the SCSI Backplane
Dissasembly and Reassembly 4-29
Advertisement
Table of Contents
Troubleshooting
