Table of Contents
Advertisement
Power button board
Component
Power button board (includes cable)
Before replacing the power button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
6.
Remove the heat sink and fans (see
7.
Remove the system board (see
Remove the power button board:
1.
Remove the Phillips PM2.0×3.0 screw (1) that secures the power button board to the keyboard/top
cover.
2.
Remove the power button board (2).
Reverse this procedure to install the power button board.
Bottom cover on page
Battery on page
28).
Heat sink and fans on page
System board on page
20).
26).
31).
Spare part number
788605-001
Power button board
33
Advertisement
Table of Contents
