Completing The Installation - Lenovo x3550 M4 Installation And Service Manual

Table of Contents

Figure 78. Operator information panel cable connection

6. Replace the cover (see "Replacing the cover" on page 203).

7. Slide the server into the rack.

8. Reconnect the power cords and any cables that you removed.

9. Turn on the peripheral devices and the server.

Completing the installation

Use this information to complete the installation.

About this task

To complete the installation, complete the following steps:

1. If you removed the air baffle, reinstall it (see "Replacing the air baffle" on page

2. If you removed the server cover, replace it (see "Replacing the cover" on page

3. Install the server in the rack cabinet (see the Rack Installation Instructions that

System x3550 M4 Type 7914: Installation and Service Guide

The following notes describe additional information when you install the cable:

v To connect the operator information panel cable on the system board, press

evenly on the cable. Pressing on one side of the cable might cause damage to

the cable or connector.

v The operator information panel cable must pass through the chassis latch

between fan 3 and fan 4 in order not to impede the fan cage.

comes with the server for instructions).