free hit counter

Error Messages; Troubleshooting By Symptom - Lenovo x3550 M4 Installation And Service Manual

Hide thumbs Also See for x3550 M4:
Table of Contents

Advertisement

You can also choose to collect data manually. It uses minimal system resources,
and can be downloaded from the website. For more information and to download
Electronic Service Agent, go to http://www-01.ibm.com/support/esa/.

Error messages

This section provides the list of error codes and messages for UEFI/POST, IMM,
and DSA that are generated when a problem is detected.
See Appendix B, "UEFI/POST diagnostic codes," on page 519, Appendix A,
"Integrated management module II (IMM2) error messages," on page 323, and
Appendix C, "DSA diagnostic test results," on page 531 for more information.

Troubleshooting by symptom

Use the troubleshooting tables to find solutions to problems that have identifiable
symptoms.
About this task
If you cannot find a solution to the problem in these tables, see Appendix C, "DSA
diagnostic test results," on page 531 for information about testing the server and
"Running the DSA Preboot diagnostic programs" on page 146 for additional
information about running DSA Preboot program. For additional information to
help you solve problems, see "Start here" on page 123.
If you have just added new software or a new optional device and the server is
not working, complete the following steps before you use the troubleshooting
tables:
Procedure
1. Check the system-error LED on the operator information panel; if it is lit, check
2. Remove the software or device that you just added.
3. Run Dynamic System Analysis (DSA) to determine whether the server is
4. Reinstall the new software or new device.
148
System x3550 M4 Type 7914: Installation and Service Guide
the light path diagnostics LEDs (see "Light path diagnostics" on page 130).
running correctly (for information about using DSA, see Appendix C, "DSA
diagnostic test results," on page 531).

Advertisement

Table of Contents
loading