Lenovo x3550 M4 Installation And Service Manual page 268

Table of Contents

Figure 155. ServeRAID M1115 adapter cable routing

Figure 156. ServeRAID M5110 adapter cable routing

10. Reconnect the power cords and any cables that you removed.

11. Replace PCI riser-card assembly 1 if you have removed it earlier (see

12. Replace the cover (see "Replacing the cover" on page 203).

13. Turn on the peripheral devices and the server.

System x3550 M4 Type 7914: Installation and Service Guide

b. ServeRAID M1115 adapter: Take the signal cable that is attached to the

drive backplane for drive bays 4 through 7 and connect it to the

ServeRAID adapter connector for drive bays 4 through 7 (port 1). Connect

the other signal cable that is attached to the drive backplane for drive bays

0 through 3 and connect it to the other connector (port 0) on the adapter.

c. ServeRAID M5110 adapter: Take the signal cable that is attached to the

drive backplane for drive bays 4 through 7 and connect it to the

ServeRAID adapter connector for drive bays 4 through 7 (port 1). Connect

the other signal cable that is attached to the drive backplane for drive bays

0 through 3 and connect it to the other connector (port 0) on the adapter.

"Replacing a PCI riser-card assembly" on page 237).

Troubleshooting