Lenovo x3550 M4 Installation And Service Manual page 269

Table of Contents

Note: When you restart the server, you are prompted to import the existing RAID

configuration to the new ServeRAID adapter.

Removing the ServeRAID adapter memory module

Use this information to remove the ServeRAID adapter memory module.

About this task

To remove the ServeRAID adapter memory module, complete the following steps:

1. Read the safety information that begins on "Safety" on page vii and

"Installation guidelines" on page 33.

2. Turn off the server and peripheral devices and disconnect all power cords.

3. Remove the cover (see "Removing the cover" on page 36).

4. Remove the ServeRAID SAS/SATA controller (see "Removing a ServeRAID

SAS/SATA controller" on page 245).

5. Grasp the memory module and lift to remove it from the connector on the

ServeRAID adapter.

Figure 157. ServeRAID memory module removal

If you are instructed to return the memory module, follow all packaging

instructions, and use any packaging materials for shipping that are supplied to

Replacing the ServeRAID adapter memory module

Use this information to replace the ServeRAID adapter memory module.

About this task

To install the ServeRAID adapter memory module, complete the following steps:

Chapter 6. Removing and replacing components

Troubleshooting