Lenovo x3550 M4 Installation And Service Manual page 327

Table of Contents

Figure 226. Installation Tool B

Figure 227. Installation tool handle adjustment

v Do not press the microprocessor into the socket.

v Make sure that the microprocessor is oriented and aligned correctly in

the socket before you try to close the microprocessor retainer.

v Do not touch the thermal material on the bottom of the heat sink or on

top of the microprocessor. Touching the thermal material will

contaminate it.

8. Remove the microprocessor socket cover, tape, or label from the surface of the

microprocessor socket, if one is present. Store the socket cover in a safe place.

Chapter 6. Removing and replacing components

Troubleshooting