Lenovo x3550 M4 Installation And Service Manual page 353
Hide thumbs
Also See for x3550 M4:
- Installation and service manual (1006 pages) ,
- Product manual (44 pages) ,
- Installation and service manual (908 pages)
Table of Contents
Advertisement
40000015-00000000
Management Controller [arg1]
reset was initiated by user [arg2].
Explanation: This message is for the use case where a
Management Controller reset is initiated by a user.
May also be shown as 4000001500000000 or
0x4000001500000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0021
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000016-00000000
ENET[[arg1]] DHCP-
HSTN=[arg2], DN=[arg3], IP@=[arg4],
SN=[arg5], GW@=[arg6], DNS1@=[arg7] .
Explanation: This message is for the use case where a
Management Controller IP address and configuration
has been assigned by the DHCP server.
May also be shown as 4000001600000000 or
0x4000001600000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0022
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000017-00000000
ENET[[arg1]] IP-
Cfg:HstName=[arg2], IP@=[arg3]
,NetMsk=[arg4], GW@=[arg5] .
Explanation: This message is for the use case where a
Management Controller IP address and configuration
has been assigned statically using user data.
May also be shown as 4000001700000000 or
0x4000001700000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0023
SNMP Trap ID:
40000015-00000000 • 4000001a-00000000
Automatically notify Support: No
User response: Information only; no action is
required.
40000018-00000000
Explanation: This message is for the use case where a
Management Controller ethernet interface is no longer
active.
May also be shown as 4000001800000000 or
0x4000001800000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0024
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000019-00000000
Explanation: This message is for the use case where a
Management Controller ethernet interface is now
active.
May also be shown as 4000001900000000 or
0x4000001900000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0025
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
4000001a-00000000
Explanation: This message is for the use case where a
user changes the DHCP setting.
May also be shown as 4000001a00000000 or
0x4000001a00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0026
Appendix A. Integrated management module II (IMM2) error messages
LAN: Ethernet[[arg1]] interface is
no longer active.
LAN: Ethernet[[arg1]] interface is
now active.
DHCP setting changed to [arg1]
by user [arg2].
335
Advertisement
Table of Contents
Troubleshooting
