free hit counter

Lenovo x3550 M4 Installation And Service Manual page 355

Hide thumbs Also See for x3550 M4:
Table of Contents

Advertisement

4000001f-00000000
Please ensure that the
Management Controller [arg1] is flashed
with the correct firmware. The
Management Controller is unable to
match its firmware to the server.
Explanation: This message is for the use case where a
Management Controller firmware version does not
match the server.
May also be shown as 4000001f00000000 or
0x4000001f00000000
Severity: Error
Alert Category: System - other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0031
SNMP Trap ID: 22
Automatically notify Support: No
User response: Update the IMM firmware to a version
that the server supports. Important: Some cluster
solutions require specific code levels or coordinated
code updates. If the device is part of a cluster solution,
verify that the latest level of code is supported for the
cluster solution before you update the code.
40000020-00000000
Management Controller [arg1]
Reset was caused by restoring default
values.
Explanation: This message is for the use case where a
Management Controller has been reset due to a user
restoring the configuration to default values.
May also be shown as 4000002000000000 or
0x4000002000000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0032
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000021-00000000
Management Controller [arg1]
clock has been set from NTP server
[arg2].
Explanation: This message is for the use case where a
Management Controller clock has been set from the
Network Time Protocol server.
May also be shown as 4000002100000000 or
0x4000002100000000
4000001f-00000000 • 40000023-00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0033
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000022-00000000
Explanation: This message is for the use case where a
Management Controller has detected invalid SSL data
in the configuration data and is clearing the
configuration data region and disabling the SSL.
May also be shown as 4000002200000000 or
0x4000002200000000
Severity: Error
Alert Category: System - other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0034
SNMP Trap ID: 22
Automatically notify Support: No
User response: Complete the following steps until the
problem is solved:
1.
Make sure that the certificate that you are
importing is correct.
2.
Try to import the certificate again.
40000023-00000000
Explanation: This message is for the use case where a
user has successfully flashed the firmware component
(MC Main Application, MC Boot ROM, BIOS,
Diagnostics, System Power Backplane, Remote
Expansion Enclosure Power Backplane, Integrated
System Management Processor, or Remote Expansion
Enclosure Processor) from the interface and IP address (
%d.
May also be shown as 4000002300000000 or
0x4000002300000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0035
Appendix A. Integrated management module II (IMM2) error messages
SSL data in the Management
Controller [arg1] configuruation data is
invalid. Clearing configuration data
region and disabling SSL.
Flash of [arg1] from [arg2]
succeeded for user [arg3] .
337

Advertisement

Table of Contents
loading

Table of Contents