Lenovo x3550 M4 Installation And Service Manual page 373
Hide thumbs
Also See for x3550 M4:
- Installation and service manual (1006 pages) ,
- Product manual (44 pages) ,
- Product manual (43 pages)
Table of Contents
Advertisement
SNMP Trap ID:
Automatically notify Support: Yes
User response: Information only; no action is
required.
40000087-00000000
Manual Call Home by user
[arg1]: [arg2].
Explanation: Manual Call Home by user.
May also be shown as 4000008700000000 or
0x4000008700000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0135
SNMP Trap ID:
Automatically notify Support: Yes
User response: IBM Support will address the problem.
40000088-00000000
Management Controller [arg1]:
Configuration restoration from a file by
user [arg2] completed.
Explanation: This message is for the use case where a
user restores a Management Controller configuration
from a file and it completes.
May also be shown as 4000008800000000 or
0x4000008800000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0136
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000089-00000000
Management Controller [arg1]:
Configuration restoration from a file by
user [arg2] failed to complete.
Explanation: This message is for the use case where a
user restores a Management Controller configuration
from a file and the restoration fails to complete.
May also be shown as 4000008900000000 or
0x4000008900000000
Severity: Error
Alert Category: System - Other
Serviceable: No
40000087-00000000 • 4000008b-00000000
CIM Information: Prefix: IMM and ID: 0137
SNMP Trap ID: 22
Automatically notify Support: No
User response:
1.
Turn off the server and disconnect it from the
power source. You must disconnect the server from
ac power to reset the IMM.
2. After 45 seconds, reconnect the server to the power
source and turn on the server.
3.
Retry the operation.
4000008a-00000000
Explanation: This message is for the use case where a
user restores a Management Controller configuration
from a file and the restoration fails to start.
May also be shown as 4000008a00000000 or
0x4000008a00000000
Severity: Error
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0138
SNMP Trap ID: 22
Automatically notify Support: No
User response:
1.
Turn off the server and disconnect it from the
power source. You must disconnect the server from
ac power to reset the IMM.
2. After 45 seconds, reconnect the server to the power
source and turn on the server.
3.
Retry the operation.
4000008b-00000000
Explanation: This message is for the use case where
an IP address for the Storage Management has changed
May also be shown as 4000008b00000000 or
0x4000008b00000000
Severity: Info
Alert Category: System - IMM Network event
Serviceable: No
CIM Information: Prefix: IMM and ID: 0139
SNMP Trap ID: 37
Automatically notify Support: No
User response: Information only; no action is
required.
Appendix A. Integrated management module II (IMM2) error messages
Management Controller [arg1]:
Configuration restoration from a file by
user [arg2] failed to start.
One or more of the Storage
Management IP addresses has changed.
355
Advertisement
Table of Contents
Troubleshooting
