Lenovo x3550 M4 Installation And Service Manual page 393
Hide thumbs
Also See for x3550 M4:
- Installation and service manual (1006 pages) ,
- Product manual (44 pages) ,
- Installation and service manual (908 pages)
Table of Contents
Advertisement
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0042
SNMP Trap ID: 40
Automatically notify Support: No
User response:
1.
Make sure that the latest level of firmware and
device drivers are installed for all adapters and
standard devices, such as Ethernet, SCSI, and SAS.
Important: Some cluster solutions require specific
code levels or coordinated code updates. If the
device is part of a cluster solution, verify that the
latest level of code is supported for the cluster
solution before you update the code.
2.
Update the firmware (UEFI and IMM) to the latest
level (Updating the firmware).
3.
Run the DSA program.
4.
Reseat the adapter.
5.
Replace the adapter.
6.
(Trained technician only) Replace microprocessor n.
7.
(Trained technician only) Replace the system board.
(n = microprocessor number)
806f0008-0a01ffff
[PowerSupplyElementName] has
been added to container
[PhysicalPackageElementName]. (Power
Supply 1)
Explanation: This message is for the use case when an
implementation has detected a Power Supply has been
added.
May also be shown as 806f00080a01ffff or
0x806f00080a01ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0084
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
806f0008-0a02ffff
[PowerSupplyElementName] has
been added to container
[PhysicalPackageElementName]. (Power
Supply 2)
Explanation: This message is for the use case when an
implementation has detected a Power Supply has been
added.
May also be shown as 806f00080a02ffff or
0x806f00080a02ffff
Severity: Info
806f0008-0a01ffff • 806f000d-0401ffff
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0084
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
806f0009-1301ffff
Explanation: This message is for the use case when an
implementation has detected a Power Unit that has
been Disabled.
May also be shown as 806f00091301ffff or
0x806f00091301ffff
Severity: Info
Alert Category: System - Power Off
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0106
SNMP Trap ID: 23
Automatically notify Support: No
User response: No action; information only.
806f000d-0400ffff
Explanation: This message is for the use case when an
implementation has detected a Drive has been Added.
May also be shown as 806f000d0400ffff or
0x806f000d0400ffff
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0162
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
806f000d-0401ffff
Explanation: This message is for the use case when an
implementation has detected a Drive has been Added.
May also be shown as 806f000d0401ffff or
0x806f000d0401ffff
Severity: Info
Appendix A. Integrated management module II (IMM2) error messages
[PowerSupplyElementName] has
been turned off. (Host Power)
The Drive
[StorageVolumeElementName] has been
added. (Drive 0)
The Drive
[StorageVolumeElementName] has been
added. (Drive 1)
375
Advertisement
Table of Contents
Troubleshooting
