Lenovo x3550 M4 Installation And Service Manual page 413
Hide thumbs
Also See for x3550 M4:
- Installation and service manual (1006 pages) ,
- Product manual (44 pages) ,
- Product manual (43 pages)
Table of Contents
Advertisement
806f010f-2201ffff
The System
[ComputerSystemElementName]
encountered a firmware hang. (Firmware
Error)
Explanation: This message is for the use case when an
implementation has detected a System Firmware Hang.
May also be shown as 806f010f2201ffff or
0x806f010f2201ffff
Severity: Error
Alert Category: System - Boot failure
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0186
SNMP Trap ID: 25
Automatically notify Support: No
User response:
1.
Make sure the server meets the minimum
configuration to start (see Power-supply LEDs).
2.
Update the server firmware on the primary page.
Important: Some cluster solutions require specific
code levels or coordinated code updates. If the
device is part of a cluster solution, verify that the
latest level of code is supported for the cluster
solution before you update the code.
(Trained technician only) Replace the system board.
3.
806f0113-0301ffff
A bus timeout has occurred on
system [ComputerSystemElementName].
(CPU 1 PECI)
Explanation: This message is for the use case when an
implementation has detected a Bus Timeout.
May also be shown as 806f01130301ffff or
0x806f01130301ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0224
SNMP Trap ID: 50
Automatically notify Support: No
User response:
1.
Reseat the microprocessor, and then restart the
server.
2.
Replace microprocessor n. (n = microprocessor
number)
806f010f-2201ffff • 806f011b-0701ffff
806f0113-0302ffff
Explanation: This message is for the use case when an
implementation has detected a Bus Timeout.
May also be shown as 806f01130302ffff or
0x806f01130302ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0224
SNMP Trap ID: 50
Automatically notify Support: No
User response:
1.
Reseat the microprocessor, and then restart the
server.
2.
Replace microprocessor n. (n = microprocessor
number)
806f011b-0701ffff
Explanation: This message is for the use case when an
implementation has detected an Interconnect
Configuration Error.
May also be shown as 806f011b0701ffff or
0x806f011b0701ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0266
SNMP Trap ID: 50
Automatically notify Support: Yes
User response: If the specified sensor is front USB
connector, reset the front USB cable on the system
board. If the specified sensor is front video connector,
reset the front video cable in the system board. If the
specified sensor is PwrPaddle cable, complete the
following steps until problem is solved:
1.
Reseat the power paddle cable on the system
board.
2.
Replace the power paddle cable.
3.
(Trained technician only) Replace the supercap n.
(n = supercap number)
4.
(Trained technician only) Replace the system board.
Front Video :
Appendix A. Integrated management module II (IMM2) error messages
A bus timeout has occurred on
system [ComputerSystemElementName].
(CPU 2 PECI)
The connector
[PhysicalConnectorElementName] has
encountered a configuration error. (Front
USB)
395
Advertisement
Table of Contents
Troubleshooting
