Lenovo x3550 M4 Installation And Service Manual page 415
Hide thumbs
Also See for x3550 M4:
- Installation and service manual (1006 pages) ,
- Product manual (44 pages) ,
- Product manual (43 pages)
Table of Contents
Advertisement
Automatically notify Support: Yes
User response:
Make sure that the latest levels of firmware and
1.
device drivers are installed for all adapters and
standard devices, such as Ethernet, SCSI, and SAS.
Important: Some cluster solutions require specific
code levels or coordinated code updates. If the
device is part of a cluster solution, verify that the
latest level of code is supported for the cluster
solution before you update the code.
2.
Update the firmware (UEFI and IMM) to the latest
level (Updating the firmware).
3.
Run the DSA program.
4.
Reseat the adapter.
5.
Replace the adapter.
(Trained technician only) Replace microprocessor n.
6.
(Trained technician only) Replace the system board.
7.
(n = microprocessor number)
806f0207-0302ffff
[ProcessorElementName] has
Failed with FRB1/BIST condition. (CPU
2)
Explanation: This message is for the use case when an
implementation has detected a Processor Failed -
FRB1/BIST condition.
May also be shown as 806f02070302ffff or
0x806f02070302ffff
Severity: Error
Alert Category: Critical - CPU
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0044
SNMP Trap ID: 40
Automatically notify Support: Yes
User response:
1.
Make sure that the latest levels of firmware and
device drivers are installed for all adapters and
standard devices, such as Ethernet, SCSI, and SAS.
Important: Some cluster solutions require specific
code levels or coordinated code updates. If the
device is part of a cluster solution, verify that the
latest level of code is supported for the cluster
solution before you update the code.
2.
Update the firmware (UEFI and IMM) to the latest
level (Updating the firmware).
3.
Run the DSA program.
Reseat the adapter.
4.
Replace the adapter.
5.
(Trained technician only) Replace microprocessor n.
6.
7.
(Trained technician only) Replace the system board.
(n = microprocessor number)
806f0207-0302ffff • 806f020d-0400ffff
806f0207-2584ffff
Explanation: This message is for the use case when an
implementation has detected a Processor Failed -
FRB1/BIST condition.
May also be shown as 806f02072584ffff or
0x806f02072584ffff
Severity: Error
Alert Category: Critical - CPU
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0044
SNMP Trap ID: 40
Automatically notify Support: Yes
User response:
1.
Make sure that the latest levels of firmware and
device drivers are installed for all adapters and
standard devices, such as Ethernet, SCSI, and SAS.
Important: Some cluster solutions require specific
code levels or coordinated code updates. If the
device is part of a cluster solution, verify that the
latest level of code is supported for the cluster
solution before you update the code.
Update the firmware (UEFI and IMM) to the latest
2.
level (Updating the firmware).
Run the DSA program.
3.
Reseat the adapter.
4.
5.
Replace the adapter.
6.
(Trained technician only) Replace microprocessor n.
7.
(Trained technician only) Replace the system board.
(n = microprocessor number) One of the CPUs :
806f020d-0400ffff
Explanation: This message is for the use case when an
implementation has detected an Array Failure is
Predicted.
May also be shown as 806f020d0400ffff or
0x806f020d0400ffff
Severity: Warning
Alert Category: System - Predicted Failure
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0168
SNMP Trap ID: 27
Automatically notify Support: Yes
User response:
Appendix A. Integrated management module II (IMM2) error messages
[ProcessorElementName] has
Failed with FRB1/BIST condition. (All
CPUs)
Failure Predicted on drive
[StorageVolumeElementName] for array
[ComputerSystemElementName]. (Drive
0)
397
Advertisement
Table of Contents
Troubleshooting
