Lenovo x3550 M4 Installation And Service Manual page 445
Hide thumbs
Also See for x3550 M4:
- Installation and service manual (1006 pages) ,
- Product manual (44 pages) ,
- Installation and service manual (908 pages)
Table of Contents
Advertisement
7.
(Trained technician only) Replace the affected
microprocessor.
806f050c-2017ffff
Memory Logging Limit Reached
for [PhysicalMemoryElementName] on
Subsystem [MemoryElementName].
(DIMM 23)
Explanation: This message is for the use case when an
implementation has detected that the Memory Logging
Limit has been Reached.
May also be shown as 806f050c2017ffff or
0x806f050c2017ffff
Severity: Warning
Alert Category: Warning - Memory
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0144
SNMP Trap ID: 43
Automatically notify Support: Yes
User response:
1.
Refer to TIP H212293 for minimum code level.
2.
Check the IBM support website for an applicable
retain tip or firmware update that applies to this
memory error.
3.
Swap the affected DIMMs (as indicated by the
error LEDs on the system board or the event logs)
to a different memory channel or microprocessor.
4.
If the error still occurs on the same DIMM, replace
the affected DIMM.
5.
(Trained technician only) If the problem occurs on
the same DIMM connector, check the DIMM
connector. If the connector contains any foreign
material or is damaged, replace the system board.
6.
(Trained technician only) Remove the affected
microprocessor and check the microprocessor socket
pins for any damaged pins. If a damage is found,
replace the system board.
7.
(Trained technician only) Replace the affected
microprocessor.
806f050c-2018ffff
Memory Logging Limit Reached
for [PhysicalMemoryElementName] on
Subsystem [MemoryElementName].
(DIMM 24)
Explanation: This message is for the use case when an
implementation has detected that the Memory Logging
Limit has been Reached.
May also be shown as 806f050c2018ffff or
0x806f050c2018ffff
Severity: Warning
Alert Category: Warning - Memory
806f050c-2017ffff • 806f050c-2581ffff
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0144
SNMP Trap ID: 43
Automatically notify Support: Yes
User response:
1.
Refer to TIP H212293 for minimum code level.
2.
Check the IBM support website for an applicable
retain tip or firmware update that applies to this
memory error.
3.
Swap the affected DIMMs (as indicated by the
error LEDs on the system board or the event logs)
to a different memory channel or microprocessor.
4.
If the error still occurs on the same DIMM, replace
the affected DIMM.
5.
(Trained technician only) If the problem occurs on
the same DIMM connector, check the DIMM
connector. If the connector contains any foreign
material or is damaged, replace the system board.
6.
(Trained technician only) Remove the affected
microprocessor and check the microprocessor socket
pins for any damaged pins. If a damage is found,
replace the system board.
7.
(Trained technician only) Replace the affected
microprocessor.
806f050c-2581ffff
Explanation: This message is for the use case when an
implementation has detected that the Memory Logging
Limit has been Reached.
May also be shown as 806f050c2581ffff or
0x806f050c2581ffff
Severity: Warning
Alert Category: Warning - Memory
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0144
SNMP Trap ID: 43
Automatically notify Support: Yes
User response:
1.
Refer to TIP H212293 for minimum code level.
2.
Check the IBM support website for an applicable
retain tip or firmware update that applies to this
memory error.
3.
Swap the affected DIMMs (as indicated by the
error LEDs on the system board or the event logs)
to a different memory channel or microprocessor.
4.
If the error still occurs on the same DIMM, replace
the affected DIMM.
Appendix A. Integrated management module II (IMM2) error messages
Memory Logging Limit Reached
for [PhysicalMemoryElementName] on
Subsystem [MemoryElementName]. (All
DIMMS)
427
Advertisement
Table of Contents
Troubleshooting
