Appendix B. Uefi/Post Diagnostic Codes - Lenovo x3550 M4 Installation And Service Manual
Hide thumbs
Also See for x3550 M4:
- Installation and service manual (1006 pages) ,
- Product manual (44 pages) ,
- Product manual (43 pages)
Table of Contents
Advertisement
Appendix B. UEFI/POST diagnostic codes
UEFI/POST diagnostic error codes can be generated when the server starts or
while the server is running. UEFI/POST codes are logged in the IMM event log in
the server.
For each event code, the following fields are displayed:
Event identifier
Event description
Explanation
Severity
User response
The following is the list of the UEFI/POST error codes and suggested actions to
correct the detected problems.
I.11002
[I.11002] A processor mismatch has been
detected between one or more
processors in the system.
Explanation: One or More Mismatched Processors
Detected
Severity: Error
User response: Complete the following steps:
© Copyright Lenovo 2012, 2015
An identifier that uniquely identifies an event.
The logged message string that appears for an event.
Additional information to explain why the event occurred.
An indication of the level of concern for the condition. The severity is
abbreviated in the event log to the first character. The following severities
can be displayed.
Table 29. Event severity levels
Severity
Informational
Warning
Error
The actions that you should take to resolve the event.
Perform the steps in the order shown until the problem is solved. After
you perform all of the actions that are described in this field, if you cannot
solve the problem, contact Lenovo Support.
Description
An informational message is something that was recorded for
audit purposes, usually a user action or a change of states that is
normal behavior.
A warning is not as severe as an error, but if possible, the
condition should be corrected before it becomes an error. It
might also be a condition that requires additional monitoring or
maintenance.
An error typically indicates a failure or critical condition that
impairs service or an expected function.
1.
This message could occur with messages about
other Processor configuration problems. Resolve
those messages first.
2.
If the problem persists, ensure that matching
processors are installed (i.e., matching option part
numbers, etc)
3.
Verify that the Processor's are installed in the
correct sockets according to the service information
for this product. If not, correct that problem.
519
Advertisement
Table of Contents
Troubleshooting
