Lenovo x3550 M4 Installation And Service Manual page 546
Hide thumbs
Also See for x3550 M4:
- Installation and service manual (1006 pages) ,
- Product manual (44 pages) ,
- Installation and service manual (908 pages)
Table of Contents
Advertisement
W.305800A • W.3808000
Severity: Warning
User response: Complete the following steps:
Go to System Settings > Settings > Driver Health
1.
Status List and find a driver/controller reporting
Configuration Required status.
Search for the driver menu from System Settings
2.
and change settings appropriately.
Save settings and restart system.
3.
W.305800A
[W.305800A] DRIVER HEALTH
PROTOCOL: Reports 'Failed' Status
Controller.
Explanation: DRIVER HEALTH PROTOCOL: Reports
'Failed' Status Controller
Severity: Warning
User response: Complete the following steps:
1.
Reboot the system.
If problem persists, switch to backup UEFI or
2.
reflash current UEFI image.
(Trained Service Technician Only) Replace system
3.
board.
W.305800B
[W.305800B] DRIVER HEALTH
PROTOCOL: Reports 'Reboot' Required
Controller.
Explanation: DRIVER HEALTH PROTOCOL: Reports
'Reboot' Required Controller
Severity: Warning
User response: Complete the following steps:
1.
No action required – system will reboot at the end
of POST.
2.
If problem persists, switch to backup UEFI or
reflash current UEFI image.
3.
(Trained Service Technician Only) Replace system
board.
W.305800C
[W.305800C] DRIVER HEALTH
PROTOCOL: Reports 'System
Shutdown' Required Controller.
Explanation: DRIVER HEALTH PROTOCOL: Reports
'System Shutdown' Required Controller
Severity: Warning
User response: Complete the following steps:
1.
Reboot the system.
2.
If problem persists, switch to backup UEFI or
reflash current UEFI image.
3.
(Trained Service Technician Only) Replace system
board.
528
System x3550 M4 Type 7914: Installation and Service Guide
W.305800D
[W.305800D] DRIVER HEALTH
PROTOCOL: Disconnect Controller
Failed. Requires 'Reboot'.
Explanation: DRIVER HEALTH PROTOCOL:
Disconnect Controller Failed. Requires 'Reboot'
Severity: Warning
User response: Complete the following steps:
Reboot the system to reconnect the controller.
1.
If problem persists, switch to backup UEFI or
2.
reflash current UEFI image.
(Trained Service Technician Only) Replace system
3.
board.
W.305800E
[W.305800E] DRIVER HEALTH
PROTOCOL: Reports Invalid Health
Status Driver.
Explanation: DRIVER HEALTH PROTOCOL: Reports
Invalid Health Status Driver
Severity: Warning
User response: Complete the following steps:
1.
Reboot the system.
If problem persists, switch to backup UEFI or
2.
reflash current UEFI image.
(Trained Service Technician Only) Replace system
3.
board.
W.3108002
[W.305800E] DRIVER HEALTH
PROTOCOL: Reports Invalid Health
Status Driver.
Explanation: GPT (GUID Partition Table) corruption
Severity: Warning
User response: Complete the following steps:
1.
F1 Setup -> System Settings -> Recovery -> Disk
GPT Recovery, set to "Automatic"; Save Settings,
then restart system.
2.
Boot to F1 setup, system will automatically try to
recover the GPT during the POST, restart the
system.
3. If problem persists, re-format the LUN or disk and
re-install the OS.
W.3808000
[W.3808000] An IMM communication
failure has occurred.
Explanation: IMM Communication Failure
Severity: Warning
User response: Complete the following steps:
1.
Reset the IMM from the CMM.
2.
Use CMM to remove AUX power from the node.
This will reboot the entire node.
Advertisement
Table of Contents
Troubleshooting
