215-802-000 • 215-901-000
5. Check system firmware level and upgrade if
necessary.The installed firmware level can be found
in the DSA Diagnostic Event Log within the
Firmware/VPD section for this component.
6. Run the test again.
Related Links:
IBM Support Website
v
Latest level of DSA
v
Latest level of BMC/IMM
v
215-802-000
Optical Drive Test Aborted
Explanation: Optical Drive Test Aborted. A read error
was encountered.
Severity: Warning
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Insert a new CD or DVD into the drive and wait for
15 seconds for the media to be recognized. Rerun
the test.
2. Check the drive cabling for loose or broken
connections at both ends or damage to the cable.
Replace the cable if damage is present.
3. Run the test again.
4. If failure remains, refer to "Troubleshooting by
symptom" in the system "Installation and Service
Guide" for the next corrective action.
Related Links:
IBM Support Website
v
v
Latest level of DSA
Latest level of BMC/IMM
v
215-803-000
Optical Drive Test Failed
Explanation: Optical Drive Test Failed. Disk may be in
use by the operating system.
Severity: Error
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Wait for the system activity to cease
2. Run the test again
3. Turn off and restart the system.
4. Run the test again.
Related Links:
IBM Support Website
v
586
System x3550 M4 Type 7914: Installation and Service Guide
Latest level of DSA
v
Latest level of BMC/IMM
v
215-804-000
Optical Drive Test Aborted
Explanation: Optical Drive Test Aborted. The media
tray is open.
Severity: Warning
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Close the media tray and wait for 15 seconds for
the media to be recognized. Run the test again.
2. Insert a new CD or DVD into the drive and wait for
15 seconds for the media to be recognized. Rerun
the test.
3. Check the drive cabling for loose or broken
connections at both ends or damage to the cable.
Replace the cable if damage is present.
4. Run the test again.
5. If failure remains, refer to "Troubleshooting by
symptom" in the system "Installation and Service
Guide" for the next corrective action.
Related Links:
IBM Support Website
v
Latest level of DSA
v
Latest level of BMC/IMM
v
215-901-000
Optical Drive Test Aborted
Explanation: Optical Drive Test Aborted. Drive media
is not detected.
Severity: Warning
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Insert a new CD or DVD into the drive and wait for
15 seconds for the media to be recognized. Rerun
the test.
2. Check the drive cabling for loose or broken
connections at both ends or damage to the cable.
Replace the cable if damage is present.
3. Run the test again.
4. If failure remains, refer to "Troubleshooting by
symptom" in the system "Installation and Service
Guide" for the next corrective action.
Related Links:
IBM Support Website
v