Lenovo x3550 M4 Installation And Service Manual page 76

Table of Contents

Figure 39. Adapter installation

6. Install the PCI riser-card assembly in the server (see "Replacing a PCI riser-card

7. Connect the cable to the newly-installed adapter.

Figure 40. Latch removal

8. Perform any configuration tasks that are required for the adapter.

If you have other devices to install or remove, do so now. Otherwise, go to

"Completing the installation" on page 92.

System x3550 M4 Type 7914: Installation and Service Guide

Attention: When you install an adapter, make sure that the adapter is

correctly seated in the riser-card assembly and that the riser-card assembly is

securely seated in the riser-card connector on the system board before you turn

on the server. An incorrectly seated adapter might cause damage to the system

board, the riser-card assembly, or the adapter.

assembly" on page 237).

Note: You might need to remove the blue latch from PCI riser-card assembly 2

to easily connect the cables.

Troubleshooting