Lenovo x3550 M4 Installation And Service Manual page 80

Table of Contents

Figure 45. ServeRAID M1115 adapter cable routing

Figure 46. ServeRAID M5110 adapter cable routing

Note: When you restart the server, you are prompted to import the existing RAID

configuration to the new ServeRAID adapter.

If you have other devices to install or remove, do so now. Otherwise, go to

"Completing the installation" on page 92.

System x3550 M4 Type 7914: Installation and Service Guide

b. ServeRAID M1115 adapter: Take the signal cable that is attached to the

drive backplane for drive bays 4 through 7 and connect it to the ServeRAID

adapter connector for drive bays 4 through 7 (port 1). Connect the other

signal cable that is attached to the drive backplane for drive bays 0 through

3 and connect it to the other connector (port 0) on the adapter.

c. ServeRAID M5110 adapter: Take the signal cable that is attached to the

drive backplane for drive bays 4 through 7 and connect it to the ServeRAID

adapter connector for drive bays 4 through 7 (port 1). Connect the other

signal cable that is attached to the drive backplane for drive bays 0 through

3 and connect it to the other connector (port 0) on the adapter.

Troubleshooting