Lenovo x3550 M4 Installation And Service Manual page 86

Table of Contents

Figure 51. Network adapter installation

System x3550 M4 Type 7914: Installation and Service Guide

7. Align the adapter so that the port connectors on the adapter line up with the

pin and thumbscrew on the chassis; then, align the connector of the adapter

with the adapter connector on the system board.

8. Press the adapter firmly until the pin, and retention brackets engage the

adapter. Make sure the adapter is securely seated on the connector on the

system board.

Attention: Make sure the port connectors on the adapter are aligned

properly with the chassis on the rear of the server. An incorrectly seated

adapter might cause damage to the system board or the adapter.

9. Fasten the thumbscrew on the rear side of the chassis.

Troubleshooting