Pptp - D-Link DIR-600L User Manual
Wireless n 150 cloud router
Hide thumbs
Also See for DIR-600L:
- User manual (93 pages) ,
- Quick installation manual (56 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
PPTP:
Select Dynamic (most common) or Static. Select Static if your
ISP assigned you the IP address, subnet mask, gateway, and
DNS server addresses.
IP Address:
Enter the IP address (Static PPTP only).
Subnet Mask:
Enter the Primary and Secondary DNS Server Addresses (Static
PPTP only).
Gateway:
Enter the Gateway IP Address provided by your ISP.
DNS:
The DNS server information will be supplied by your ISP (Inter-
net Service Provider.)
Server IP:
Enter the Server IP provided by your ISP (optional).
PPTP Account:
Enter your PPTP account name.
PPTP Password:
Enter your PPTP password and then retype the password in
the next box.
Maximum Idle
Enter a maximum idle time during which the Internet connection
Time:
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
MTU:
Maximum Transmission Unit - You may need to change the MTU
for optimal performance.
Connect Mode:
Select either Always-on, Manual, or Connect-on demand.
D-Link DIR-600L User Manual
Internet Setup
PPTP
DIR-600L
16
- Quick Links:
- Hardware Overview
- Wireless Setup
Hide quick links:
Advertisement
Table of Contents
