Section 3 - Configuration
This option allows you to define fixed routes to defined destinations.
Tick this checkbox to enable or disable fixed routes
Enable:
to defined destinations.
Use the drop-down menu to choose the WAN or
Interface:
WAN (Physical Port) Interface the IP packet must use
to transit out of the Router.
The IP address of the packets that will take this route.
Destination:
The subnet of the IP address of the packets that will
Subnet Mask:
take this route.
Specifies the next hop to be taken if this route is used.
Gateway:
D-Link DIR-600L User Manual
Routing
DIR-600L
35