IBM 6C1 Service Manual page 106
Pseries 610
Hide thumbs
Also See for 6C1:
- Technical overview and introduction (40 pages) ,
- Technical overview and introduction (42 pages) ,
- Installation manual (144 pages)
Table of Contents
Advertisement
Table 1. Service Processor Checkpoints. (continued)
Checkpoint
E051
E053
E054
E055
E060
E061
88
Service Guide
Description
Reading processor card VPD
Reading system board VPD
Reading system board VPD
Reading power supply VPD
Preparing to auto power-on (AC
restored)
Preparing to auto power-on (Timer)
Action/ Possible Failing FRU
If one processor is installed:
v Replace processor card 1
Location P1-C1
v Replace the system board.
Location: P1
(See note 3 on page 115.)
If two processor cards are installed:
1. Remove processor card 2 (P1-C2)
and turn on the power. If the system
does not hang on E051, replace
processor card 2. If removing
processor card 2 does not fix the
system, continue to the next step.
2.
Remove processor card 1 (P1-C1)
and install processor card 2 in slot 1
(P1-C1) and turn on the power. If
the system does not hang on E051,
replace processor card 1. If this
swap does not fix the system,
continue to the next step.
3. Replace the system board.
Location: P1
(See note 3 on page 115.)
Replace the system board.
Location: P1
(See note 3 on page 115.)
Replace the system board.
Location: P1
(See note 3 on page 115.)
Power supply
Location: P3-V1
Location: P3-V2
Location: P3-V3
1. Replace the system board.
Location: P1
(See note 3 on page 115.)
2. Replace processor card 1
Location P1-C1
3. Replace processor card 2
Location P1-C2
1. Replace the system board.
Location: P1
(See note 3 on page 115.)
2. Replace processor card 1
Location P1-C1
3. Replace processor card 2
Location P1-C2
Advertisement
Table of Contents
