IBM 6C1 Service Manual page 114
Pseries 610
Hide thumbs
Also See for 6C1:
- Technical overview and introduction (40 pages) ,
- Technical overview and introduction (42 pages) ,
- Installation manual (144 pages)
Table of Contents
Advertisement
Table 2. Firmware Checkpoints. (continued)
Checkpoint
E153
E154
E155
96
Service Guide
Description
End adapter FCODE probe/evaluation
Create PCI bridge node
Probing PCI bridge secondary bus
Action/ Possible Failing FRU
1. If a location code is associated with
the checkpoint:
v Replace the FRU identified by the
location code
v Replace, one at a time, the other
PCI adapter cards on the same
PCI bus. See "Bus SRN to FRU
Reference Table" on page 178.
v Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
2. If no location code is associated
with the checkpoint, go to MAP
1540: Minimum Configuration, "Step
1540-24" on page 81.
1. If a location code is associated with
the checkpoint:
v Replace the FRU identified by the
location code
v Replace, one at a time, the other
PCI adapter cards on the same
PCI bus. See "Bus SRN to FRU
Reference Table" on page 178.
v Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
2. If no location code is associated
with the checkpoint, go to MAP
1540: Minimum Configuration, "Step
1540-24" on page 81.
1. If a location code is associated with
the checkpoint:
v Replace the FRU identified by the
location code
v Replace, one at a time, the other
PCI adapter cards on the same
PCI bus. See "Bus SRN to FRU
Reference Table" on page 178.
v Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 81.
2. If no location code is associated
with the checkpoint, go to MAP
1540: Minimum Configuration, "Step
1540-24" on page 81.
Advertisement
Table of Contents
