Modem Configuration Menu; Serial Port Selection Menu - IBM 6C1 Service Manual
Pseries 610
Hide thumbs
Also See for 6C1:
- Technical overview and introduction (40 pages) ,
- Technical overview and introduction (42 pages) ,
- Installation manual (144 pages)
Table of Contents
Advertisement
Modem Configuration Menu
Entries at the top of the Modem Configuration Menu display the status of the current
selections. Selections are made in the sections, labeled Modem Ports and Modem
Configuration File Name. Select the serial port that you want to activate and then
select the modem configuration file for the modem on the port. To set up both serial
ports with modems, make your selections one port at a time.
For information on choosing a modem configuration file, see "Sample Modem
Configuration Files" on page 325 and "Transfer of a Modem Session" on page 331.
Port 1 Modem Configuration File Name:
Port 2 Modem Configuration File Name:
To make changes, First select the port and then the configuration file
name
Modem Ports:
1. Serial port 1
2. Serial port 2
Modem Configuration File Name:
3. none
4. modem_f_sp
5. modem_f0_sp
6. modem_f1_sp
7. modem_z_sp
8. modem_z0_sp
30. Save configuration to NVRAM and Configure modem
98. Return to Previous Menu
Serial Port Selection Menu
This menu allows you to enable and/or disable the call-in functions of each serial port in
any combination.
1. Serial Port 1 Call-Out:
2. Serial Port 2 Call-Out:
3. Serial Port 1 Call-In:
4. Serial Port 2 Call-In:
98. Return to Previous Menu
Modem Configuration Menu
9. modem_m0_sp
10. modem_m1_sp
Serial Port Selection Menu
Currently Disabled
Currently Disabled
Currently Disabled
Currently Disabled
Chapter 7. Using the Service Processor
201
Advertisement
Table of Contents
