Table of Contents
Advertisement
Address
Display on the
Remote Control
RCS-SH80BG.WL
Position of
receiver's
(inside indoor
unit) address
switch
RCS-TRP80BG.WL
Position of
receiver's
(inside indoor
unit) address
switch
RCS-SS80BG.WL
Position of
the operation
panel's (inside
indoor unit)
address switch
RCS-BH80BG.WL
Position of
the Receiver's
Address Switch
Setting Addresses (RCS-XM18BG.WL / K Types)
(Setting the address of the indoor unit)
1. First of all, set the address for the remote control with Setting Remote Control Address (See Page 8-7).
2. Press [Emergency Operation]
When you do this, the lamps of the display will blink one after another.
3. Press
on the remote control.
4. The buzzer will sound and the address of the indoor unit will change to the address displayed on the
remote control.
5. If you press [Emergency Operation]
will turn off.
8
NOTE
• Please do not hold the [Emergency Operation]
lamps are blinking one after another.
• Make sure to operate while the indoor unit is stopped.
• The address of indoor unit is set to "ALL" at the time of the shipment.
The position of the
receiver's address
switch does not
matter.
The position of the
receiver's address
switch does not
matter.
The position of the
receiver's address
switch does not
matter.
The position of the
receiver's address
switch does not
matter.
of the indoor unit for four seconds or more.
of the indoor unit once, the lamps on the indoor unit's display
1 2 3
1 2 3
4 5 6
4 5 6
button of the indoor unit down while the indoor unit's display
8-8
For 1, 2 and 3, set
the switch on the
left and for 4, 5 and
6, to the right.
For 1, 2 and 3, set
the switch on the
left and for 4, 5 and
6, to the right.
1 2 3
4 5 6
For 1, 2 and 3, set
the switch on the
left and for 4, 5 and
6, to the right.
For 1, 2 and 3, set
the switch on the
left and for 4, 5 and
6, to the right.
Hide quick links:
Advertisement
Table of Contents
