Table of Contents
Advertisement
Adjustment Procedure Cont.
3.3
The Geometry Menu
OSD Agent
Edge Adjustment
Moire
Clock
Phase
Input Select: Configures the preferred input selections.
(If a facility is not fitted, it will be displayed but not selectable.)
OSD Agent
Signal Type Priority
Video Priority Search
Order
Graphics Search
Component Video Type RCB or YUV. Incorrect colors may be due to wrong selection here.
The Color Menu
OSD Agent
Video Inputs
Computer Inputs-
Individual Color
Adjustments
VT201CHC User Guide
Description
Adjusts Picture Size and Position Controls. The four "Edge"
controls shift each edge within available limits. Note that the
maximum available shift depends on the incoming video standard
and the display panel type, and may be restricted vertically. This
provides very flexible and easy to use image size an position
control.
N/A
Sets the total number of input pixels per line to correspond with the
input source, and will normally require adjustment for unusual
signals.
Adjusts the internal clock to sample each pixel as near as possible
to the centre. Phase will normally require adjustment for unusual
types of signal.
Description
Graphics-video
CVBS -Y/C - Component
Y/C - CVBS - Component
Component - CVBS - Y/C
RGB-DVI Note: DVI not available
Description
Adjusts the contrast (video gain) and brightness (black level)
parameters.
Red, green and blue levels can be thought of as individual
brightness controls for each of red, green and blue. They should be
adjusted for the desired color balance and to minimize noise on low
intensity colors and greys. Color tints can be added as required.
8
150-060
Advertisement
Table of Contents
