Table of Contents
Advertisement
Section
7
Mechanical Drawings
Model
VT201CHC
VT201CHC-IR
7.1
Mounting Procedure - VT201CHC
1. Remove the rear plastic console cabinet.
2. Disconnect the video cable, touch interface cable and power cord.
3. Remove the 4-6 screws that secure the display side mounting brackets.
4. Remove the CRT Display
5. Remove the original front plastic console bezel.
6. Install the new front replacement console bezel with the new IR touch frame.
7. Connect the membrane extension cable to the membrane tab that projects through the front console
bezel.
8. Mount the VT201CHC display and secure to the side mounting brackets with the provided screws.
9. Connect the membrane extension cable to the display where marked. Connect the video cable and
power cord to the display where marked. Set the display power switch to the ON position.
10. Connect the touch interface cable directly to the "D" connector on the new flat IR touch frame.
11. Make any OSD screen adjustments if required.
12. Install the rear plastic console cabinet.
Note:
For display upgrade only when replacing the flat screen Sony monitor, omit step 5, step 6, and step 7.
VT201CHC User Guide
Description
Display only with original IR touch
Display and replacement IR touch
MOUNTING INSTRUCTIONS
MOUNTING INSTRUCTIONS
13
Page(s)
14-15
16-17
150-060
Advertisement
Table of Contents
