Sony SRW-5000 Maintenance Manual page 108
Hd digital
Hide thumbs
Also See for SRW-5000:
- Operation manual (202 pages) ,
- Installation manual (54 pages) ,
- Brochure & specs (12 pages)
Table of Contents
Advertisement
[F8] (LED) Key
Performs the LED lighting checks.
Execution Procedure
1. On the PANEL CHECK menu, press the [F8] (LED)
key.
. All the LEDs on the control panel are illuminated.
An LED that is not illuminated is abnormal.
DIAL
PANEL MAINTENANCE MENU
F1
LED TEST
MFD
F2
All LEDs should ON.
LED which turns out
does not work normally.
F3
Press F8 key to test each LED.
Press F10 key to exit.
KEY
BEEP
F4
LCD
OEL
KEY
DIAG
F5
ALT
F6
F7
2. Press the [F8] (LED) key again.
. All the LEDs on the control panel are extinguished.
An LED that is not extinguished is abnormal.
DIAL
PANEL MAINTENANCE MENU
F1
LED TEST
MFD
All LEDs should OFF.
F2
LED which turns on
does not work normally.
F3
Press F8 key to test each LED.
Press F10 key to exit.
KEY
BEEP
F4
LCD
OEL
KEY
DIAG
ALT
F5
F6
F7
3-14
LED
EXIT
F10
F8
F9
LED
EXIT
F8
F9
F10
3. Press the [F8] (LED) key repeatedly to perform the
lighting checks of the LEDs, from REC INHIBIT to
FORWARD lamps in order.
. The LEDs on the control panel are illuminated.
An LED that is not illuminated is abnormal.
DIAL
PANEL MAINTENANCE MENU
F1
LED TEST
MFD
LED test : REC INHIBIT
F2
If LED does not light on,
it does not work normally.
F3
Press F8 key to test
the next LED.
KEY
Press F10 key to exit.
BEEP
F4
LCD
OEL
KEY
DIAG
ALT
F5
F6
F7
4. To cancel or exit the check, press the [F10] (EXIT)
key.
. The test menu is closed, and the menu returns to the
PANEL CHECK menu.
. To perform the LED lighting checks again, return to
step 1.
LED
EXIT
F8
F9
F10
SRW-5000/5500
Advertisement
Table of Contents
