Sony SRW-5000 Maintenance Manual page 150
Hd digital
Hide thumbs
Also See for SRW-5000:
- Operation manual (202 pages) ,
- Installation manual (54 pages) ,
- Brochure & specs (12 pages)
Table of Contents
Advertisement
[F8] (LCD GAIN) Key
Performs the gain adjustment of the color display.
Execution Procedure
1. On the OTHERS CHECK menu, press the [F8] (LCD
GAIN) key to display the GAIN ADJUST menu.
GAIN
OTHERS CHECK
F1
ALL
LCD GAIN ADJUST
GAIN
Press numerical keys to adjust.
F2
CH1
CH1(Blue) :0x80
GAIN
CH2(Green):0x80 => 0x00
F3
CH2
CH3(Red)
GAIN
Press F9 key to save.
CH3
F4
DIAG
ALT
F5
F6
F7
2. To perform the gain adjustments for all channels in
one operation.
. Press the [F1] (GAIN ALL) key
To perform the gain adjustment for a specified chan-
nel:
. Press the [(]/[)] key, or [F2] (GAIN CH1), [F3]
(GAIN CH2), or [F4] (GAIN CH3) key to select a
channel to execute its gain adjustment.
3. Enter a gain adjustment value in hexadecimal, using
numeric keys. (0x00 to 0xff)
. To enter the values A to F, press the numeric keys 0
to 5 while pressing the [SFT] (SHIFT) key respec-
tively.
To return the gain adjustment value to the initial value,
press the [F8] (DE-FAULT) key.
n
To change the adjustment value and save it to the NV-
RAM in one operation, set the value using the MULTI
CONTROL knob.
Clockwise (2):
Counterclockwise (3): The data value decreases.
4. Press the [F9] (SAVE) key
. The gain value is changed and saved onto the NV-
RAM.
5. Press the [F10] (EXIT) key to return to the OTHERS
CHECK menu.
3-56
0x00
:0x80
0x00
DE-
SAVE
EXIT
FAULT
F8
F9
F10
The data value increases.
[F9] (SYSTEM MENU) Key (SRW-5000)
Sets the operation mode of this unit.
n
The selectable systems differ according to the VTR
settings or option boards.
The unselectable system setting items are shaded.
Execution Procedure
1. Press the [F9] (SYSTEM MENU) key to display the
SYSTEM menu.
SYSTEM
SYSTEM MENU
F1
LINE
1080/59.94i
[F1]SYSTEM LINE
SYSTEM
SYSTEM
[F2]SYSTEM SCAN MODE
F2
SCAN
SCAN
[F3]SYSTEM FRAME
[F4]SYSTEM SIGNAL MODE 422
SYSTEM
FREQ
F3
[F6]FRAME CONVERT
[F7]ACTIVE LINE
SYSTEM
[F8]CANCEL [F9]Exec of Reset VTR Sys
SIGNAL
F4
FRAME
ACTIVE
DIAG
CNVERT
LINE
ALT
F5
F6
F7
2. Press the [F4] (SYSTEM SIGNAL) key several times
for setting to the 4:2:2 or 4:4:4.
m
. The 4:4:4 can be selected when the option HKSR-
5003 is installed.
. Each setting item can also be selected using the [(]/
[)] key or the MULTI CONTROL knob.
SYSTEM
SYSTEM MENU
F1
LINE
1080/59.94i
[F1]SYSTEM LINE
SYSTEM
SYSTEM
[F2]SYSTEM SCAN MODE
F2
SCAN
SCAN
[F3]SYSTEM FRAME
[F4]SYSTEM SIGNAL MODE 422
SYSTEM
FREQ
F3
[F6]FRAME CONVERT
[F7]ACTIVE LINE
422 YPbPr
SYSTEM
[F8]CANCEL [F9]Exec of Reset VTR Sys
444 RGB
SIGNAL
F4
FRAME
ACTIVE
DIAG
CNVERT
LINE
ALT
F5
F6
F7
422 YPbPr
1080
Interlace
29.97Hz
1080/59.94i
1080
(STOP & STANDBY OFF/EJECT)
CANCEL EXEC
EXIT
F8
F9
F10
422 YPbPr
1080
Interlace
29.97Hz
1080/59.94i
1080
(STOP & STANDBY OFF/EJECT)
CANCEL
EXEC
EXIT
F8
F9
F10
SRW-5000/5500
Advertisement
Table of Contents
