Sony SRW-5000 Maintenance Manual page 283

Table of Contents

Installation

3. Attaching the T Drawer Assembly

(1) Clean the mounting surfaces between the T

drawer assembly and the MD base assembly.

(2) Insert the positioning boss (B) of the T

drawer assembly into the positioning hole (B)

at a shallow depth. Fit the positioning boss

(A) to the positioning hole (A) by pushing

and turning from outside of the thread ring

(3) Fix the T drawer assembly with the two

Tightening torque: 78.4 x 10

{8.0 kgf.cm}

(4) Connect the harness to the connector of the

tape top sensor.

(5) Hang the harness on the hook of the T drawer

assembly to fasten it.

Be careful not to apply excessive force to the

adjusting arm.

SRW-5000/5500

Tape top sensor

Positioning hole (A)

Attach the T Drawer Assembly

Positioning boss (A)

Threading ring assembly

Positioning boss (A)