Sony SRW-5000 Maintenance Manual page 296

Table of Contents

2. Removing the Fan Motors

Remove the two screws to remove the each fan

3. Attaching the Fan Motors

Attach each new fan motor in the direction as

shown in the figure, then fix it with two screws.

Tightening torque: 80 x 10

{8.0 kgf.cm}

. Pay attention not to mistake the direction of the

labeled side and the harness direction.

. Be sure not to be caught the harnesses.

4. Connecting the Harnesses

(1) Connect the each harness of the fan motor to

the connectors CN73 and CN74 on the MB-

Fan motor A: CN74

(2) Hook the harnesses to each harness clamp.

Remove/Attach the Fan Motors

Harness clamp

MB-964 board

Harness clamp

Connect the Harnesses

SRW-5000/5500