Sony SRW-5000 Maintenance Manual page 82
Hd digital
Hide thumbs
Also See for SRW-5000:
- Operation manual (202 pages) ,
- Installation manual (54 pages) ,
- Brochure & specs (12 pages)
Table of Contents
Advertisement
ERROR-02 REEL SLACK SHTL ERROR
Description:
Tape slacking or tape breaking was detected in SEARCH, FF, or REW mode.
Detecting conditions:
1) When the take-up value is lower than the specified value with respect to the
2) When the relation among the capstan FG, supply reel FG, and take-up reel
3) When the supply reel and take-up reel do not coincide in rotation direction
Sub error message:
None
. Cassette compartment trouble or installation defect
Possible causes:
. Supply or take-up reel FG waveform shaper circuit (SS-95 board) trouble
. Supply or take-up reel motor trouble
. Supply or take-up reel motor drive circuit (DR-508 board) trouble
. Capstan motor trouble
. Capstan motor drive circuit (DR-508 board) trouble
. Capstan FG waveform shaper circuit (SS-95 board) trouble
. Take-up torque insufficiency during REW due to supply tension sensor or
. Servo adjustment defect on capstan, reel(s), and supply tension sensor
. Supply or take-up reel brake trouble
. Supply or take-up reel brake solenoid drive circuit (DR-508 board) trouble
. Harness disconnection
. Reel table height adjustment defect
. Tape path and drum troubles
. Tape abnormality (The winding state has a problem.)
Protecting operation:
Switches to the protection mode.
If this error occurred at the tape end, the VTR may be recovered to the normal
state automatically from the protection mode.
c
Be sure to take out the cassette manually (refer to Section 1-11). Do not turn on
the power again with the cassette tape in to avoid damage the tape.
2-4
tape supply value.
FG are out of the specification.
continuously for more than one second.
* The reel did not rotate because the cassette was lifted-up from the speci-
fied position.
supply tension detector circuit (SS-95 board) trouble
SRW-5000/5500
Advertisement
Table of Contents
