Table of Contents
Advertisement
Monitor
AC adaptor (supplied
with the BKM-16R)
Controller (BKM-16R)
1
Turn off the MAIN POWER switch of the monitor
before connecting the units.
2
Connect to the network by using a 10BASE-T/
100BASE-TX cable (shielded-type, optional).
Notes
• When an optional LAN cable is connected, use a
shielded-type cable to prevent a malfunction due to
noises.
• We recommend to use an optional switching hub
with auto selection function (AUTO MDI/MDI-X)
of a straight/cross cable.
When the switching hub without auto selection
function is used, connect the monitor and switching
LAN (10/100)
NETWORK
connector
PEER TO
LAN
PEER
Set to LAN.
LAN (10/100)
DC 5V/12V IN
connector
connector
NETWORK
LAN
PEER TO PEER
Set to LAN.
Monitor
NETWORK
PEER TO
LAN
Set to LAN.
Switching hub
(recommended: with
AUTO MDI/MDI-X
function)
hub with the straight cable, and the controller and
switching hub with the cross cable.
3
Connect the output cable on the AC adaptor supplied
with controller to the DC 5V/12V IN connector of the
controller.
Note
When the multiple units are connected, set for the LAN
before setting the NETWORK switch to LAN (page
28).
4
Set the NETWORK switches of each monitor and the
controller to LAN.
LAN (10/100)
connector
PEER
Connections
25
- Quick Links:
- Connecting the Controller (Bkm-16R)
Hide quick links:
Advertisement
Table of Contents
