Table of Contents
Advertisement
1. If you have DIO
the Tape Input and Tape Output
format for each card to ADAT. OPT
cards need no configuration.
2. If the D8B is the clock master, set the
Sample Rate to either 44.1kHz or
48kHz, and set the Apogee Clock to
Internal (in the Digital I/O Setup
window). If it is a clock slave, then set
the Apogee Clock to Word Clock. Set
the Sample Rate to match the Sample
Rate selected on the HDR24/96.
Apogee
Clock I/O
Card
Word
Clock Out
(HDR24/96
as Master)
Depress the
Termination
button if the
HDR24/96 is set
to Slave
8 cards installed, set
•
8
•
Word
Clock Out
Word
Clock In
HDR
Word
Sync
Clock Out
Card
(D8B as
Master)
Use
one
only
Word
Clock In
Word
Clock Out
OPT•8 Cards
ADAT Optical Out
ADAT Optical In
ADAT Optical Out
ADAT Optical In
OPT•8 Cards
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
