Table of Contents
Advertisement
MIDI IN
1. You must turn on
the Digital 8•Bus
first, then turn on
the TASCAM
recorders.
2. Make sure the
MODE DIP
switches on the
SY-88 have the 2nd
DIP switch in the
up position and all
the rest of the
switches down.
This selects the
MIDI input.
3. The MMC-38
should have firm-
ware version 1.05.
The SY-88 should
have firmware
version 4.01.
The DA-88 should have firmware version 4.01.
To determine the firmware version:
MMC-38: Internally marked on EPROM.
DA-88: Hold down the STOP/PLAY/REC buttons while powering up the DA-88 to display the
DA-88 ROM version.
SY-88: Hold down the PLAY/REC/FF buttons while powering up the DA-88 to display the
SY-88 ROM version.
4. If using any of the newer 24-bit DTRS machines, you should have version 2.1 EPROMs
installed in the DIO•8 cards (DIO•8 cards shipped after 7/2000 have version 2.1 EPROMs
installed). If the label on the socketed IC (located on the bottom left corner of the DIO•8 card,
near the edge connector) has anything but "v2.1" printed on it, you should get the free upgrade
by contacting our parts department at 800-258-6883.
MIDI OUT
DATA CABLE
(to Console)
TERMINATION PLUG
-
-
-
TAPE 1
8
TAPE 9
16
TAPE 17
24
BUS OUT 1-8
&
SURROUND OUT
18
17
16
24
23
22
MASTER OUT
2 TRACK IN A
L R
CR
MAIN
2 TRACK IN B
L R
L
CR
NEAR FIELD
2 TRACK IN C
L R
R
MASTER OUT
MIDI IN
MIDI OUT
DA-88
MASTER DECK
(TRACKS 1-8)
DA-88
SLAVE DECK
(TRACKS 9-16)
DA-88
SLAVE DECK
(TRACKS 17-24)
15
14
13
DIGITAL 8•BUS
21
20
19
PHONES 1
PHONES 2
L R
STUDIO OUT
L R
L R
PUNCH I/O
TALKBACK
L R
REMOTE CPU
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
