Cisco UCS C220 M4 Installation And Service Manual page 126
Hide thumbs
Also See for UCS C220 M4:
- Maintaining the server (72 pages) ,
- Quick start manual (29 pages) ,
- Service note (10 pages)
Table of Contents
Advertisement
Embedded SATA RAID Controllers
Note
If necessary, use this command to change the filename of the driver update disk to a name with fewer
Step 4
than eight characters: copy dud-[driver version].img dud.img
Open the DOS Command Prompt and navigate to the directory where raw write.exe is located.
Step 5
Enter the following command to create the installation diskette: raw write
Step 6
Press Enter.
Step 7
You are prompted to enter the name of the boot image file.
Enter: dud.img
Step 8
Press Enter.
Step 9
You are prompted for the target disk.
Insert a floppy disk into the server and enter: A:
Step 10
Press Enter.
Step 11
Press Enter again to start copying the file to the diskette.
Step 12
After the command prompt returns and the floppy disk drive LED goes out, remove the disk.
Step 13
Label the diskette with the image name.
Step 14
Preparing Installation Disks with a Linux Operating System
Under Red Hat Linux and SUSE Linux, you can use a driver disk utility to create disk images from image
files.
The driver image is too large for a floppy disk, so use a USB thumb drive instead.
Note
Download the Cisco UCS C-Series drivers ISO, as described in
Step 1
page C-16
Extract the dud.img file:
Step 2
Burn the ISO image to a disc.
a.
Browse the contents of the drivers folders to the location of the embedded MegaRAID drivers:
b.
/<OS>/Storage/Intel/C600/
Expand the Zip file, which contains the folder with the driver files.
c.
Copy the driver update disk image dud-[driver version].img to your Linux system.
Step 3
Insert a blank USB thumb drive into a port on your Linux system.
Step 4
Create a directory and mount the DUD image to that directory:
Step 5
mkdir <destination_folder>
mount -oloop <driver_image> <destination_folder>
Copy the contents in the directory to your USB thumb drive.
Step 6
Cisco UCS C220 M4 Server Installation and Service Guide
C-20
RaWrite is not included in the driver package.
and save it to your Linux system that has a disk drive.
Appendix C
RAID Controller Considerations
Downloading the LSI MegaSR Drivers,
OL-32473-01
- Quick Links:
- Initial Server Setup
Hide quick links:
Advertisement
Table of Contents
