Table of Contents
Advertisement
a IRIS/MB ACTIVE (iris/master black active) button
Pressing the button causes it to light and enables iris and
CLOSE button control and adjustment of the master black on
this control panel.
Pressing the PANEL ACTIVE button also causes this button to
light.
b MASTER BLACK knob
This knob is for manually adjusting the master black. The
setting value is displayed in the master black display window.
c Master black display window
This window is for displaying the setting value of the master
black.
d Camera number/tally display window
This window displays a number in amber for the camera
controlled by the control panel.
When a red tally signal is sent to the camera, the number is
displayed in black and the background of the number lights in
red. When a green tally signal is sent to the camera, the
number is displayed in black and the background of the
number lights in green.
When both red and green tally signals are simultaneously
sent, the left half of the background lights in red, and the right
half lights in green.
Connector Panel
MSU-1000
1
2
a AC IN (AC power supply input) connector
This is for connecting an AC power supply with a separately
sold power cord. You can secure the power cord to the control
panel with a separately sold plug holder.
b POWER switch
This switch is for turning on/off the power of the control panel.
c CCU/CNU REMOTE (CCU/CNU remote) connector (8-
pin)
This is for connecting to the RCP/CNU connector of the CCU
or the MSU connector of the CNU.
d AUX REMOTE (auxiliary remote) connector (8-pin
multi-connector, female)
This is a spare connector.
e
(network) connector (8-pin RJ-45)
This is for connecting to the network.
Use a network cable (shielded type, category 5 or above) to
connect to the hub of the network (10BASE-T/100BASE-TX).
18
Names and Functions of Parts
e EXT (lens extender) indicators
D. EXT : Lights when the digital extender function is turned
ON.
EXT : Lights when the lens extender is used.
f IRIS knob
This knob is for manually adjusting the iris of the lens when the
AUTO IRIS button is not lit.
When the AUTO IRIS button is lit, you can finely adjust the
reference value for auto adjustment of the iris.
g IRIS display window
This window displays the iris setting as an F number. If the lens
is closed, "CLS" is displayed.
h AUTO IRIS button
This button is for adjusting the iris automatically.
i CALL button
This button is for communication. If it is pressed, the tally state
for the camera or CCU changes, and a call signal is sent. A call
signal can also be received from another device with this
button. When a call signal is sent (or received), this button
lights and the call sound plays. You can select the call sound.
MSU-1500
345
REMOTE
CCU/CNU
AUX
DC IN 10.5-17V
EXT I/0
7
6
f DC IN (DC power supply input) connector (4-pin XLR,
male)
This connector is used when supplying power from a battery.
The DC input voltage range is +10.5 V to +17 V.
g I/O PORT connector (50-pin)
This is used for external interface connections.
3
4
5
2
REMOTE
CCU/CNU
AUX
DC IN 10.5-17V
EXT I/0
7
6
1
Hide quick links:
Advertisement
Table of Contents
