Table of Contents
Advertisement
MSU Config
Display
Customize
/Sound
Security
3
[Network]
Press
.
The Network screen appears.
Network
Network
CNS
Info
4
[LAN I/F]
Press
.
The LAN I/F screen appears.
The Speed and Duplex buttons are not displayed when
Negotiation is set to Auto, as the Speed/Duplex setting is
made automatically.
LAN I/F
LAN I/F
Negotiation
OFF
Auto
Speed
10M
100M
Set
This screen allows settings for the equipment for LAN
connection.
Perform the setting according to the connection
requirements for the target.
LAN I/F OFF: Sets LAN I/F to OFF.
Negotiation Auto: The connection settings for the target
equipment are configured automatically. Use Auto
only when the target equipment also supports the
Negotiation function.
Speed 10M/100M: Sets the connection speed.
Duplex Half/Full: Sets the communication method: Half
(half duplex) or Full (full duplex).
20
Installation
Engineer Mode
Exit
Mode
Date/Time
Network
Information
Backup
Engineer Mode
Exit
LAN I/F
TCP/IP
Engineer Mode
Exit
Duplex
Half
Full
Cancel
To set to LEGACY mode
Set the control panel to LEGACY mode when connecting
without using a LAN cable. When the control panel is
connected, for example, to a multi-camera system with a CNU-
700 or to a LAN system and a LAN cable is not directly
connected to the control panel, always set the control panel to
LEGACY mode.
The TCP/IP and RCP number do not need to be set.
1
Enter engineer mode. (page 35)
2
Display the MSU Config screen. (page 35)
MSU Config
Display
Customize
Mode
/Sound
Security
3
[Network]
Press
.
The Network screen appears.
Network
Network
CNS
LAN I/F
Info
4
[CNS]
Press
.
The CNS screen appears.
Camera Network System
Legacy
Mode:Semi-Auto
Bridge
Target:0.0.0.0
Mode:Master
MCS
Master:0.0.0.0
MSU No.1
MSU
5
[Legacy]
Press
.
6
[Set]
Press
.
The control panel is set to LEGACY mode.
Engineer Mode
Exit
Date/Time
Network
Information
Backup
Engineer Mode
Exit
TCP/IP
Engineer Mode
Exit
Set
Edit
Cancel
Edit
Hide quick links:
Advertisement
Table of Contents
