Cisco ASA 5510 Quick Start Manual page 48

Adaptive security appliance asa 5500 series

Hide thumbs Also See for Cisco ASA 5510:

Table of Contents

Step 1: Cabling the AIP SSM Management Interface

To cable the AIP SSM management interface, perform the following steps:

Locate a yellow Ethernet cable from the accessory kit.

Step 1

Connect one end of the cable to the management port on the AIP SSM, as shown in Figure 9.

Step 2

Connect the other end of the cable to your network device.

Step 3

Figure 9

Connecting to the Management Port

Management port

Step 2: Configuring the ASA 5500 to Divert Traffic to the AIP SSM

To specify the traffic that should be diverted from the security appliance to the AIP SSM, perform the

following steps:

To specify the traffic to be diverted to the AIP SSM, add a class map using the class-map

Step 1

command. For more information, see

Appliance Command Line Configuration

RJ-45 to RJ-45 cable

Using Modular Policy Framework in the

Guide.

Cisco Security

Table of Contents

Show Quick Links

Table of Contents

Cisco asa 5520 Cisco asa 5540