Table of Contents
Advertisement
Quick Links
EC DECLARATION OF CONFORMITY
The Manufacturer of the product covered is:
The manufacturer hereby declares that the machine as detailed in this declaration fulfi ls all the rel-
evant provisions of the Machinery Directive and other appropriate directives as detailed below. The
manufacture further declares that the machine as detailed in this declaration, where applicable, fulfi ls
the relevant provisions of the essential health and safety requirements.
The Directives covered by this Declaration are as detailed below
2006/42/EC The Machinery Directive.
2006/95/EC. Low Voltage Equipment Directive.
2004/108/EC. Electromagnetic Compatibility Directive,
93/68/EC. The CE Marking Directive.
2002/96/EC as amended by 2003/108/ECThe Waste Electrical and Electronic Equipment (WEEE)
Directive.
2002/88/EC. The Emission of Gaseous and Particulate Pollutants from Internal Combustion
Engines to be Installed in Non-Road Mobile Machinery Directive
2000/14/EC, Annex VI, and the Directive 2005/88/EC The Noise Emissions in the Environment
by Equipment for use Outdoors Regulations 2001 (SI 2001/1701 as amended)
And is in conformity with the applicable requirements of the following documents
EN 12601
EN 55012
EN 61000-6-1
EN ISO 3744
Product Details:
Description: Inverter Generator
Model No: DIG1500
Brand Name: Warrior Generator
Name and address of technical documentation holder.
The technical documentation required to demonstrate that the product meets the requirements of
directive has been compiled and is available for inspection by the relevant enforcement authorities.
Signed:
Technical Manager
Winch Solutions Ltd,
Unit 27 Salisbury Road, Haydock Ind Est, St Helens, Merseyside, WA11 9XG, UK
Date: 19/12/2014
Print: Paul Bimson
www.warriorgenerators.co.uk
Winch Solutions Ltd T/A Warrior Generators
Unit 27 Salisbury Road
Haydock Industrial Estate
St Helens
WA11 9XG - United Kingdom
Tel: +44 (0)1942 528271
14
Advertisement
Table of Contents
Related Manuals for WARRIOR DIG1500
Summary of Contents for WARRIOR DIG1500
-
Page 1: Ec Declaration Of Conformity
EC DECLARATION OF CONFORMITY The Manufacturer of the product covered is: Winch Solutions Ltd T/A Warrior Generators Unit 27 Salisbury Road Haydock Industrial Estate St Helens WA11 9XG - United Kingdom The manufacturer hereby declares that the machine as detailed in this declaration fulfi ls all the rel- evant provisions of the Machinery Directive and other appropriate directives as detailed below. - Page 2 900W Inverter Generator DIG1500 Always read the instruction manual. Retain for future use.
-
Page 3: Certificate Of Guarantee
CERTIFICATE OF GUARANTEE This product is guaranteed for a period of 1 Year, with effect from the date of purchase and applies only to the original purchaser. This guarantee only applies to defects arising from, defective materials and or faulty workmanship that become evident during the guarantee period only and does not include consumable items. -
Page 4: Safety Information
SAFETY INFORMATION Specific Safety Instructions Check the fuel system periodically for leaks, Electrical generator must always be grounded, seals and hoses should be checked for signs of (connected to earth). deterioration or chafing. Check for loose or missing clamps, damaged fuel tank or filler cap. Petrol or diesel powered generators must never All defects should be corrected before further be used in an unventilated closed spaces. - Page 5 SAFETY INFORMATION Warning! Vibrations can cause an improperly b) Avoid body contact with earthed or tightened fuel cap to loosen or come off and grounded surfaces such as pipes, spill quantities of fuel. In order to reduce the risk radiators, ranges and refrigerators. of fuel spillage and fire, tighten fuel filler cap by There is an increased risk of electric shock if hand as securely as possible.
- Page 6 SAFETY INFORMATION e) Do not overreach. Keep proper footing cutting edges are less likely to bind and are and balance at all times. This enables easier to control. better control of the power tool in g) Use the power tool, accessories and tool unexpected situations.
- Page 7 COMPONENTS...
- Page 8 UNPACKING AND OPERATING INSTRUCTIONS...
-
Page 9: Operating Instructions
OPERATING INSTRUCTIONS Check the oil level by inserting the dipstick into Petrol is extremely flammable and explosive the filler neck without screwing it in. If the level under certain conditions. is low, fill to the top of the oil filler neck with the Do not smoke or allow flames or sparks where recommended oil. - Page 10 OPERATING INSTRUCTIONS...
- Page 11 OPERATING INSTRUCTIONS...
- Page 12 OPERATING INSTRUCTIONS...
- Page 13 OPERATING INSTRUCTIONS Spark Plug Maintenance Visually inspect the spark plug. Discard it if the To ensure proper engine operation, the spark insulator is cracked or chipped. Please use a plug must be properly gapped and free of spark plug gauge to check the spark plug gap, it deposits.
- Page 14 OPERATING INSTRUCTIONS Air Filter Fig 21 A dirty air cleaner will restrict air flow to the carburettor. To prevent carburettor malfunction, service the air cleaner regularly. Warning! Using gasoline or flammable solvent to clean the air filter can cause a fire or explosion.
- Page 15 OPERATING INSTRUCTIONS the piston is on the compression stroke (when Fig 25 resistance is felt) then stop pulling. Store the generator in a dry well ventilated place under a cover to prevent any dust or debris from accumulating on the generator. PLEASE NOTE: If using for a caravan, motor home or boat etc refer to the...
-
Page 16: Troubleshooting
TROUBLESHOOTING... - Page 17 TROUBLESHOOTING...
-
Page 18: Maintenance Chart
MAINTENANCE CHART Item Remark Pre-operation Initial 1 month Every 3 month Every 6 month Every 12 month check (daily) or 20hours or 50 hours or 100 hours or 300 hours Spark plug Check condition Adjust gap and clean Replace if required Engine oil Check oil level Replace... -
Page 19: Environmental Protection
ENVIRONMENTAL PROTECTION Information for (private householders) for the environmentally responsible disposal of Waste Electrical and Electronic Equipment (WEEE) This symbol on products and or accompanying documents indicates that used and end of life electrical and electronic equipment should not be disposed of in household waste. - Page 20 SYMBOLS...
- Page 21 SPECIFICATION MODEL 1200i 1500i 1800i Type Inverter Generator 50Hz 100, 230V, 240V AC Voltage 60Hz 100, 120V, 240V Max. Output 1.2 kVA 1.5 kVA 1.8 kVA Rated Output 1.0 kVA 1.2 kVA 1.5 kVA Power Factor DC Output 12V / 4.0A Model XY147F Type...
- Page 22 MODEL 2000i 2500i 3500i Type Inverter Generator 50Hz 100, 230V, 240V AC Voltage 60Hz 100, 120V, 240V Max. Output 2.0 kVA 2.5 kVA 3.5 kVA Rated Output 1.8 kVA 2.2 kVA 3.0 kVA Power Factor DC Output 12V / 8.3A Model XY152F-3 XY152F-3...
- Page 23 9．WIRING DIAGRAM 1200i, 1500i, 1800i DC PROTECTOR DC winding DC SOCKET AC SOCKET Stepping motor Main Economic Winding Invert cell switch PILOT Control OVERLOAD winding LOW OIL Oil sensor Engine switch Ignition winding Spring winding High Spark pressure Wrap plug...
- Page 24 2000i, 2500i, 3500i FUSE DC winding Stepping motor Main Economic Winding Invert cell switch PILOT Control OVERLOAD winding LOW OIL Oil sensor Engine switch Ignition winding Spring winding High Spark pressure Wrap plug...