• 3GStation • 3GStation Professional • 3GStation Carrier This Quick Start Guide is designed for use with the 3GStation Professional. The 3GStation and 3GStation Carrier models have their own separate documentation. The chart below provides an overview of the differences between the three versions:...
The second LED indicates that the black Ethernet connector on the power adapter is connected properly to a device. 3G Modem Received Signal Strength LEDs (3-6) Indicates signal strength between the 3GStation Professional and 3G connection. Threshold Value min/-110 dBm -95 dBm...
Product Overview Rear Panel Antenna Connectors USB Port Ethernet Port Antenna Connectors Connects the antennas. USB Port Connects a 3G USB Adapter. Ethernet Port Standard 10/100 Ethernet port that connects to the power adapter using an Ethernet cable.
Connecting a USB Adapter 1. Connect the TS9 connector to the 3G USB adapter. 2. Connect the antennas the 3GStation Professional (as shown on page 9 of this guide). Connect the 3G USB Adapter to the USB Port on the 3GStation Professional.
Hardware Installation Installing a miniPCIe Card 1. Remove the two M1.6 screws from the bottom of the 3GStation Professional. Slide off the front cover of the 3GStation Professional by pressing down on it while holding the sides of the back cover.
Page 8
3GStation Professional 3. Unscrew and remove the RPSMA toTS9 cable.
Page 9
Hardware Installation 4. Replace the RPSMA to TS9 cable with the RPSMA to U.FL cable. 5. Align the connectors on the miniPCIe card to the slot and slide it into position. The card will snap into place.
Page 10
PCIe card. 7. Insert your 3G Sim Card into the 3G Sim slot. 8. Reconnect the front cover of the 3GStation Professional by sliding up the front cover while holding the sides of the back cover. Reconnect the two M1.6 screws.
Connecting the Antennas 1. Connect each antenna to an antenna connector on the 3GStation Professional by rotating it clockwise. 2. Adjust each antenna upright and then to a 45 degree angle on each side so there is 90 degree separation.
Simply connect the Desktop Stand if you want to place your 3GStation Professional on a flat surface. Using the Wall-Mount Option Use the Wall-Mount Assembly to mount the 3GStation Professional on a wall. 1. Align the wall-mounting bracket to the desired position on a wall.
Hardware Installation 6. Connect the 3GStation Professional to the Wall-Mount Bracket. It will snap lock into place. Connecting the Ethernet Cables 1. Connect an Ethernet cable to the Ethernet port on the 3GStation Professional and connect the other end to the...
Page 14
LAN on the PoE Adapter. 3. Connect the power cord to the power port on the PoE Adapter. Connect the other end of the power cord to a power outlet. The Power LED should light up on the front of the 3GStation Professional.
Page 15
Accessing the AirOS Utility Accessing the AirOS Utility 1. Launch your Web browser and type http://192.168.1.1 in the address field and press enter (PC) or return (Mac). Note: Your computer needs to be on the 192.168.1.x subnet. If you have DHCP enabled on your Ethernet adapter, it should receive an address automatically.
Page 16
3GStation Professional 3. The AirOS interface will appear. Go to the Network tab and enter your 3G connection settings under 3G Settings: a. Enter your username in the GSM Username field. b. Enter your password in the GSM Password field.
Page 17
Click Change. You will be prompted to apply the changes. To proceed, click Apply. Congratulations! Installation is complete. You should be able to access the Internet via the 3GStation Professional by connecting to the wireless network or by using the Ethernet port.
Buyer for breach of warranty and shall constitute fulfillment of all liabilities of UBIQUITI NETWORKS with respect to the quality and performance of the Products. UBIQUITI NETWORKS reserves the right to inspect all defective Products (which must be returned by Buyer to UBIQUITI NETWORKS factory freight prepaid).
Page 19
Compliance Disclaimer: UBIQUITI NETWORKS does not warrant that the operation of the products is error-free or that operation will be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible for damages or claims of any nature or description relating to system performance, including coverage, buyer’s selection of products for buyer’s application and/or...
5dBi *. Antennes pas inclus dans cette liste ou ayant un gain supérieur à 8dBi sont strictement interdite pour une utilisation avec cet appareil. L'antenne doit impédance est de 50 ohms. Modèle 3GStation gain d'antenne 2 dBi Professional est.
UBIQUITI NETWORKS, device est conforme aux exigences [French] essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Par la présente, UBIQUITI NETWORKS déclare que ce UBIQUITI NETWORKS device, est conforme aux exigences essentielles et aux autres dispositions de la directive 1999/5/CE qui lui sont applicables.
Page 22
UBIQUITI NETWORKS device, megfelel a vonatkozó alapvetõ [Hungarian] követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Íslenska Hér me l sir UBIQUITI NETWORKS yfir ví a UBIQUITI NETWORKS device, er í samræmi vi grunnkröfur og a rar kröfur, sem ger ar eru í [Icelandic] tilskipun 1999/5/EC.