IBM IntelliStation Z Pro 6223 Hardware Maintenance Manual And Troubleshooting Manual page 116
Hide thumbs
Also See for IntelliStation Z Pro 6223:
- User manual (134 pages) ,
- Installation manual (110 pages) ,
- Hardware setup manual (50 pages)
Table of Contents
Advertisement
Note: See "System replaceable units" on page 117 to determine which components should be replaced by a field
service technician.
Error code/symptom
9003
9xxx thru BZxx (SCSI bus error caused by cables,
termination, defective drives, etc.). Z refers to the specific
channel or channels that cause the error.
EFFE (Firmware code corrupt or download jumpers are in
place)
FFFF or other code not listed
106
IntelliStation Z Pro Types 6223 and 6227: Hardware Maintenance Manual and Troubleshooting Guide
FRU/action
1. Flash latest level of BIOS code and firmware for
controller.
2. Confirm that this controller is a supported option for
this system.
3. ServeRAID controller.
4. Integrated RAID controller on the computer).
1. Follow indications at "POST (ISPR) error procedures"
on page 107. Follow those instructions before
continuing with the next steps listed in this index.
2. SCSI cable.
3. SCSI backplane.
4. Hard disk drive.
5. ServeRAID controller.
1. Flash latest level BIOS and firmware for controller;
then, remove jumpers.
2. ServeRAID controller.
1. Follow indications at "POST (ISPR) error procedures"
on page 107.
2. SCSI cable.
3. SCSI backplane.
4. Hard disk drive.
5. ServeRAID controller.
- Quick Links:
- Post Beep Codes
- Beep Symptoms
Hide quick links:
Advertisement
Table of Contents
