Related Manuals for Siemens HiPath BizIP
Summary of Contents for Siemens HiPath BizIP
- Page 1 Documentation HiPath BizIP Operation Getting Started Communication for the open minded Siemens Enterprise Communications www.siemens.com/open...
-
Page 2: Table Of Contents
HiPath BizIP devices ........ -
Page 3: Hipath Bizip Overview
HiPath BizIP Overview Your HiPath BizIP is a pioneering communication platform based on forward-looking tech- nology. The use of peer-to-peer technology in the LAN means that adding more tele- phones to the system could not be easier. You will find details of the various devices on ”HiPath BizIP devices”... -
Page 4: Care Instructions
Never open the telephones or a key module! In the event of problems, con- sult your service personnel or specialist dealer. Use only original Siemens accessories! The use of other accessories is dangerous and will invalidate the warranty and the CE mark. -
Page 5: Installation
Installation Wall-mounted installation of the access device BizIP AD 20 Wall brackets are supplied for mounting the telephone on the wall. When installing the device, please note the following points: • Choose an installation site that can easily be reached with all cables required (for example, to the NTBA). -
Page 6: Hipath Bizip Devices
HiPath BizIP devices BizIP AD 20 access device Front view with LEDs LAN: local network WAN: DSL connection active SIP: VoIP connection (Internet telephony) ISDN: ISDN connection Power: operating indicator For further information on the meaning of the LED indicators, see Administrationsanlei- tung. -
Page 7: Bizip 410 A Telephone
BizIP 410 a telephone Handset Illuminated graphic display, Four lines with 24 characters each 19 programmable function keys with blank labels and LED indicators Loudspeaker for ring tones and open listening Keys for telephone settings and for browsing through lists Keypad Speakerphone microphone Keys for browsing and confirming... -
Page 8: Ports On The Bizip 410 Telephones
Ports on the BizIP 410 telephones The symbols used in the illustration correspond to the name of the port on your telephone. optiPoint key module LAN connection to the switch LAN connection to the PC Power supply unit Headset Handset optiPoint adapter [1] optional [2] optional, only BizIP 410 a... -
Page 9: Getting Started
1. First gather all the required configuration data (see”Configuration ta- ble” 2. Next install the various HiPath BizIP devices, see ”Installation” 3. Finally configure your HiPath BizIP so that you can start using your tele- phone system immediately (see ”Initial configuration” 15). Configuration table A number of details are required for initial configuration. -
Page 10: Installation
BizIP AD 20 comes with a plug-in power supply unit, a LAN cable and two S cables. The telephones in your HiPath BizIP system: BizIP 410 a and BizIP 410 e (any combination permitted). A power supply unit must then be used with the telephone if the switch used does not support "Power over Ethernet"... -
Page 11: Performing Installation
Before beginning the remainder of the installation, you should have a free port on an ISDN network terminator (NTBA) and on a DSL modem (NTB- BA), depending on the type of access you require. The HiPath BizIP devices must all be located in one LAN segment without intermediate routing. - Page 12 Figure: Overview of a default configuration To the ISDN/DSL connection ISDN DSL modem network terminator BizIP AD 20 rear side Analog fax machine Switch BizIP 410 e PC at BizIP 410 BizIP 410 a BizIP 410 underside...
- Page 13 Repeat Step 5 and Step 6 for each BizIP 410 telephone you want to connect (up to 16 stations). 8. Connecting additional devices HiPath BizIP features a number of configuration options for connecting additional devices. You can connect additional devices at any time later. For more information, refer to the Administrationsanleitung.
- Page 14 that are described below (Section ”Initial configuration” 15) are required in order to use the public telephone network (ISDN) and the Internet (VoIP) to make external calls.
-
Page 15: Initial Configuration
The required configuration list data is available, see ”Configuration ta- ble” • A PC is available, providing you with access to your HiPath BizIP LAN. Make sure that the options "TCP/IP" and "Obtain an IP address automat- ically" (DHCP) are activated in the PC’s network settings. •... - Page 16 (upload, consult your VoIP provider). – Move reconnect between: Many DSL providers automatically per- form forced cleardown after 24 hours on line. Enter a time here when your BizIP AD 20 is generally not in use. Your HiPath BizIP will forc-...
- Page 17 ibly clear down any live connections every day at the time entered. This ensures that the DSL provider’s forcible cleardown does not oc- cur at an inappropriate time for you. If applicable, you will find this data in your configuration table, see ”Configuration table”...
- Page 18 For information on data for various providers, siehe Administrationsanleitung. Only the user ID of the selected ITSP is active. NAT Traversal (STUN) lets you operate your HiPath BizIP behind an external router. If necessary, select STUN and enter the Provider Registrar and the Port.
- Page 19 Admin- istrationsanleitung. Check whether up-to-date firmware is available for your BizIP 410 telephones and your BizIP AD 20 and install it. Further information on updating HiPath BizIP is available in der Administrationsanlei- tung.
-
Page 21: Further Information
CD in the following directory: [CD/DVD drive]:\manual\en\pdf\InfoPhone.pdf Part number: A31003-K1000-C101-*-6Z19 • Operating Manual This contains a detailed description of all HiPath BizIP functions. There is a PDF version of the document on your system CD in the fol- lowing directory: [CD/DVD drive]: \manual\en\pdf\UserGuideBizIP410_en.pdf Part number: A31003-K1000-C102-*-7619 •... - Page 22 Subject to availability. Right of modification reserved. The trademarks used Siemens Enterprise Communications are owned by Siemens Enterprise www.siemens.com/open Communications GmbH & Co. KG or their re- spective owners.