Table of Contents
Advertisement
User Guide
Installing and Removing 5.25-inch Devices
The server contains three slots in which backup devices including DVD-ROM and
magnetic tape drives can be installed. The DVD-ROM drive is factory installed in
bottom slot. To install a backup device, you must also installed a SCSI controller.
■
The server can include a maximum of two devices: two sin-
gle-height devices, or one double-height device.
■
Set the SCSI termination of the 5.25-inch device to OFF and
the SCSI ID to a value which is not assigned to any other
device. Refer to the vendor documentation that comes with
the device on how to set the values.
■
For single-height device, first install a device in slot 1. Then
install another device in slot 2.
For double-height device, install the device in the slots 2 and
3.
■
To install an internal DVD-RAM, set the operation mode to
"SLAVE".
C
B
A
Figure 72: 5.25-inch Device Slots
Notes:
A: Slot 1
B: Slot 2
C: Slot 3
142
www.nec-computers.com
Advertisement
Table of Contents
