Connecting The Cash Drawer - Epson TM-T88V-i Technical Reference Manual
Hide thumbs
Also See for TM-T88V-i:
- User manual (258 pages) ,
- Technical reference and user's manual (164 pages) ,
- Technical reference manual (146 pages)
Table of Contents
Advertisement
Connecting the Cash Drawer
Using the optional product for TM printer is recommended.
If the optional external buzzer is used, you cannot use a cash drawer.
Specifications of drawers differ depending on makers or models. When you use a
drawer other than specified, make sure its specification meets the following
conditions.
WARNING
Otherwise, devices may be damaged.
The load, such as a drawer kick solenoid, must be connected between pins 4 and 2 or pins
4 and 5 of the drawer kick connector.
When the drawer open/close signal is used, a switch must be provided between drawer
kick connector pins 3 and 6.
The resistance of the load, such as a drawer kick solenoid, must be 24
input current must be 1A or less.
Be sure to use the 24V power output on drawer kick connector pin 4 for driving the equip-
ment.
Use a shielded cable for the drawer connector cable.
Two driver transistors cannot be energized simultaneously.
Leave intervals longer than 4 times the drawer driving pulse when sending it
continuously.
Be sure to use the product power supply (connector pin 4) for the drawer power
source.
Do not insert a telephone line into the drawer kick connector.
Doing so may damage the telephone line or product.
Connect the connector of the drawer kick cable to the product.
Chapter 2
or more or the
Drawer kick connector
Setup
2
43
- Quick Links:
- Reset
Hide quick links:
Advertisement
Table of Contents
