free hit counter

Network Setting - Epson TM-T88V-i Technical Reference Manual

Hide thumbs Also See for TM-T88V-i:
Table of Contents

Advertisement

Network Setting

There are following methods for network settings.
• EPSON TMNet WebConfig:
• EpsonNet Config:
• Easy Setup:
This section briefly explains how to set from EPSON TMNet WebConfig.
Though Easy Setup requires no network connection during setup, you must specify values for
all the setting items available for EPSON TMNet WebConfig.
For about using EpsonNet Config, refer to the manual of EpsonNet Config.
For about Easy Setup, refer to "TM-i Series Easy Setup Guide".
1. Connect via a wired LAN
Connect this product and a PC for setting via a wired LAN.
To use a wireless LAN, connect the wireless LAN unit to the USB port on this product.
2. Check the IP address of this product
When this product is turned on and becomes ready for printing, it prints out the automatically
acquired IP address.
If no IP address is printed, print a status sheet and check the IP address.
3. Start EPSON TMNet WebConfig
Access the address bar of the Web browser on the PC for setting and enter the followings to start
EPSON TMNet WebConfig.
http://TM-i's IP address/PrinterConfigurationPage/
For detail, see
"Starting EPSON TMNet WebConfig" on page
4. Set up TCP/IP
Select the [Configuration] menu and then [Wired] - [TCP/IP] or [Wireless] - [TCP/IP], and set TCP/
IP.
After setting, click [Submit] at the bottom of the screen. Then the settings are written to the product.
If [Submit] is not clicked, the settings are not applied.
For detail, see
"TCP/IP Information (Wired)" on page 73
74.
52
Set from the computer's web browser
Set from EpsonNet Config, which is first installed on the computer.
Set from the USB memory where the configuration file is stored.
(TM-i firmware Ver.3.0 or later)
or
70.
"TCP/IP Information (Wireless)" on page

Hide quick links:

Advertisement

Table of Contents
loading